Brushed brass splashback

Brushed brass splashbacks by Halman Thompson are made to measure and created to your exact specifications. They will look exceptional in any kitchen! 

Brushed brass is a lovely material. It looks amazing and exhibits all the qualities we love about brass with the extra character provided by the brush effect.  

You’ll see brushed brass used a lot in magazines, show homes and by interior designers. The colour, and depth of character provide lightness, colour and an element of luxury every kitchen deserves. 

All brushed brass splashbacks from Halman Thompson are created to order by experienced artisans. They can be cut to any shape or size and are ideal for a wide range of uses.


Select your finish and order by the size you need for your project.


Each of our bespoke finishes can be purchased in sheets cut to your size to create unique and beautiful Splashbacks.
  • Pricing includes delivery and turnaround time is under 2 weeks
  • Each piece is coated in a gloss finish lacquer suitable for kitchens
  • Fitting is simple and can be done with standard epoxy resins or liquid nail onto most surfaces


Once you select your finish and size our team will work with you throughout the process to produce the perfect piece for your kitchen.

For a Bespoke Quote please get in touch.

Handmade brushed brass splashbacks

Brushed brass is made using a specialist process that takes the top layer of shine off the metal to create a brushed effect.  

All products are created by hand to your exact specifications. 

We first cut your splashback to size using a precision laser. We will cut any holes for sockets or pipes and ensure the splashback fits perfectly into place. 

We’ll then prepare the metal for treatment and apply the brushed effect until it meets your requirements. 

Once complete, the splashback is inspected for quality and finish and then covered in a tough, clear lacquer. 

The lacquer is optional, but we recommend it. It will protect your splashback from damage and ensure it continues to look amazing for many years to come. 

Once lacquered and fully protected, your splashback will be shipped to your door ready for fixing to the wall. 

If you need a particularly large splashback, we will prepare several sheets of brass at once. Maximum sheet size is 2000mm x 1000mm, orders larger than this will comprise multiple sheets. 

All sheets will be prepared at the same time by the same team and will be as similar as possible. Minor variations in pattern are possible though. 

Mounting your brushed brass splashback

Mounting your brushed brass splashback is very straightforward. Sheets are light enough to be secured by epoxy or suitable adhesive. 

As we cut the splashback to your exact dimensions, it should slide perfectly into place and require little or no adjustment.  

All you need to do is prepare the wall so it’s flat and the adhesive can stick, offer up the splashback to make sure it fits and then apply the adhesive and secure it into place. 

Once the adhesive has dried and edges sealed, your splashback is ready to use! 

Caring for your brushed brass splashback

Caring for your brushed brass splashback is very straightforward. The lacquer protects the brass from daily use so a wipe down with warm soapy water and a soft cloth will be sufficient to keep it looking amazing. 

We provide full care instructions with every splashback, so you’ll know exactly how to care for it. 

If you think a brushed brass splashback is the finishing touch your kitchen needs, contact Halman Thompson for a personalised quote! 


How to Hang Wall Art

How to Hang Wall Art

Wall art can be a challenge to hang properly due to the shape, size and design. Wall art with lots of hollow areas or intricate designs can provide a challenge to mount, which is why we created this guide. If you have invested time designing your own wall art for...

Brass Bedrooms: Adding Luxury to Your Daily Routine

Brass Bedrooms: Adding Luxury to Your Daily Routine

When people mention brass, our minds will often be taken back to the brass bedsteads and brass lamps from our childhoods or parents. That’s something of an injustice. Even though brass has been around forever, it’s one of the few metals that has managed to remain on...


Select your finish and order by the size you need for your project.

If you can dream it, we will create it.

In addition to our brass and copper finishes, our team of artisan designers and craftsmen are ready to project into reality. We work with a variety of woods and metals to create bars, tables, balustrades, staircases, worktops, and much more.
Print Friendly, PDF & Email